The PDUMH20ATNET 16-Outlet Metered PDU with Automatic Transfer Switching from Tripp Lite is a 120V 20A metered PDU system with Automatic Transfer Switching (ATS) that includes a digital display to indicate total PDU power consumption in amperes. Outlets are sequentially turned-on at 250 millisecond intervals when the PDU is first energized from an unpowered state to prevent inrush-related equipment interaction on startup. Installed web/network monitoring card enables remote power monitoring and control. It remotely displays status of input power, load capacity, and outlet power status via secure network or web browser interface. It offers individual outlet control to power on, off, or cycle AC output to regain control of locked-up servers and other network devices. Load ramping and shedding provides automatic power management. It supports notification and logging of input power status, event notification, output power and load conditions. The PDUMH20ATNET supports 1U rackmount installation in a 2 or 4 post racks.
The attached power cord serves as the primary AC input cable, while the included detachable power cord serves as the optional-use secondary AC input connection. The PDU system passes the primary input power through to connected equipment whenever line voltage and frequency levels are normal. If the primary input source goes outside of these tolerances or fails altogether, the ATS will automatically switch all PDU output to the secondary line sourced input power (when available) to maintain continuous operation of connected loads without reboots or service interruptions. Once the primary power source is restored, the PDU will automatically switch back to primary sourced input power. The dual input cabling can be configured for UPS maintenance bypass of standard UPS systems or to create a redundant dual-UPS power source for a critical, single-corded network device. Front AC input LED's show what input AC source is being utilized by the PDU.
Manufacturer Part# : PDUMH20ATNET
Dell Part# : A0968837